54Mbps Outdoor AP/Client/Bridge, 802.11b/g, 250mW, 7dBi antenna
EOC1650 is a revolutionary product consists of conciseness, quality, and flexibility. It comes with 7dBi internal antenna and upgradable SMA interface, it supports distance control ranges from 1km to 30km.

Frequency Band 802.11b/g - 2.412-2.472GHz Modulation OFDM = BPSK, QPSK, 16-QAM, 64-QAM, DSSS = DBPSK, DQPSK, CCK Standards IEEE 802.11b/g (2.4GHz WLAN) Operation Mode Access Point, Client Bridge, Client Router RF Output Power (antenna port) IEEE802.11g: up to 27dBm, IEEE802.11b: up to 27dBm Antenna / Connector 7dBi Internal Panel Antenna, 5dBi SMA Antenna Data Transfer Rate ( Signaling ) 11 b/g：54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps Receiver Sensitivity 802.11b: -97 dBm @ 1Mbps, -89 dBm @ 11Mbps 802.11g: -92 dBm @ 6Mbps, -74 dBm @ 54Mbp Network Interface 10/100 Fast Ethernet RJ-45 Topology Infrastructure Security WEP Encryption-64/128/152 bit, WPA/WPA2 Personal (WPA-PSK using TKIP or AES), WPA/WPA2 Enterprise (WPA-EAP using TKIP), 802.1x Authenticator, Hide SSID in beacons, MAC address filtering, up to 50 field, L2 isolation(AP mode), Wireless STA (Client) connected list Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Power Supply Power Adapter 24V / 0.6A DC, POE adapter Dimension 190 x 50 x 38mm

108Mbps Outdoor AP/Client Bridge/Client router, 802.11b/g, 600mW, 10dBi antenna
EOC-2610 is a long range outdoor wireless Access Point and Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum. It supports distance control by 1km to 30km.

Frequency Band 802.11b/g - 2.412-2.472GHz Standards IEEE 802.11b/g (2.4GHz WLAN) Operation Mode Access Point, Client Bridge, Client Router, WDS AP/CB RF Output Power (antenna port) IEEE802.11b - up to 28dBm IEEE802.11g - up to 28dBm Antenna / Connector Embedded 10dBi Panel antenna, SMA connector Data Transfer Rate ( Signaling ) 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps Receiver Sensitivity 802.11b: -97 dBm @ 1Mbps, -89 dBm @ 11Mbps 802.11g - 92 dBm @ 6Mbps, -74 dBm @ 54Mbp Network Interface 10/100 Fast Ethernet RJ-45 Topology Infrastructure Security WEP Encryption-64/128/152 bit, WPA/WPA2 Personal (WPA-PSK using TKIP or AES), WPA/WPA2 Enterprise (WPA-EAP using TKIP), 802.1x Authenticator/supplicant, Hide SSID in beacons, 802.1Q VLAN, L2 isolation(AP mode), Wireless STA (Client) connected list, Multiple SSID Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Power Supply Power Adapter 24V / 0.6A DC, POE adapter Dimension 260mm (L) x 84mm (W) x 55mm (H) Weight 300g

54Mbps Outdoor AP, 802.11a, 200mW, 8dBi antenna
EOC5510 is a long range outdoor wireless Access Point / Client Bridge that operates in 5GHz frequency. It provides high bandwidth up to 54Mbps and features high transmitted output power as well as superior sensitivity. EOC5510 extends radio coverage, avoids unnecessary roaming between Access Points and ensures a stable wireless connection while reduces the number of required equipments.

Frequency Band 802.11a: 5.150-5.350GHz, 5.470-5.725GHz, 5.725-5.825GHz Modulation OFDM = BPSK, QPSK, 16-QAM, 64-QAM Standards IEEE 802.11a Operation Mode Access Point, Client Bridge, Client Router, WDS AP/CB RF Output Power (antenna port) up to 23dBm Antenna / Connector 8dBi 5GHz Panel Antenna SMA connector Data Transfer Rate ( Signaling ) 11 a : 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps Receiver Sensitivity 802.11a -92dBm @ 6Mbps, -73dBm @ 54Mbps Network Interface 10/100 Fast Ethernet RJ-45 Topology Infrastructure Security WEP Encryption-64/128/152 bit, WPA/WPA2 Personal (WPA-PSK using TKIP or AES), WPA/WPA2 Enterprise (WPA-EAP using TKIP), 802.1x Authenticator, Hide SSID in beacons, MAC address filtering, up to 50 field, Wireless STA (Client) connected list Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Power Supply Power Adapter 24V / 0.6A DC, POE adapter Temperature Range Operating -20°C-70°C Dimension 260mm (L) x 84mm (W) x 55mm (H) Weight 270g

54Mbps Outdoor AP, 802.11a/b/g, 500mW, 14dBi antenna
EOC-5610 is a long range outdoor wireless Access Point / Client Bridge that operates in both 5GHz and 2.4GHz frequency. It provides high bandwidth up to 108Mbps with Super Mode (SuperA/G) and features high transmitted output power as well as superior sensitivity.

Frequency Band 802.11b/g = 2.412-2.472GHz 802.11a = 5.150-5.350GHz, 5.470-5.725GHz, 5.725-5.825GHz Modulation OFDM = BPSK, QPSK, 16-QAM, 64-QAM, DSSS = DBPSK, DQPSK, CCK Standards IEEE 802.11a/b/g Operation Mode Access Point, Client Bridge, Client Router, WDS AP/CB RF Output Power (antenna port) IEEE802.11b: 27dBm@1-11Mbps IEEE802.11g: 22dBm@54Mbps, 26dBm@6~24Mbps IEEE802.11a: 20dBm@54Mbps, 26dBm@6~24Mbps Antenna / Connector 14dBi 5GHz Panel Antenna 2 x SMA connector Data Transfer Rate ( Signaling ) 11 a/b/g：54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps Receiver Sensitivity 802.11b: -97 dBm @ 1Mbps, -91 dBm @ 11Mbps 802.11g: -92 dBm @ 6Mbps, -75 dBm @ 54Mbp 802.11a: -92m @ 6Mbps, -73dBm @ 54Mbps Network Interface 10/100 Fast Ethernet RJ-45 Topology Infrastructure Security WEP Encryption-64/128/152 bit, WPA/WPA2 Personal (WPA-PSK using TKIP or AES), WPA/WPA2 Enterprise (WPA-EAP using TKIP), 802.1x Authenticator, Hide SSID in beacons, MAC address filtering, up to 50 field, L2 isolation(AP mode), Wireless STA (Client) connected list Configuration / Management Web-based configuration (HTTP) Firmware Upgrade Upgrade firmware via web-browser Power Supply Power Adapter 24V / 0.6A DC, POE adapter Dimension 260mm (L) x 84mm (W) x 55mm (H) Weight 300g

2.4GHz/14dBi antenna, RB411R, 2.4Ghz wireless card
iSpot R2411R/14 with integrated RB/411R is ideal low cost solution. It can be used for CPE (client premise equipment) on 2.4Ghz Point-to-Multipoint networks and pair of those can be used to create 2.4Ghz Backbone (Point-to-Point link).

RouterBOARD RouterBOARD 411R, 32MB RAM, 1 LAN, RouterOS Level 3 Wireless card 802.11b/g 100mW Antenna 2.4-2.48Ghz, 14dBi Power 24v power supply + PoE Injector

2.4GHz/14dBi antenna, RB411AR, 2.4Ghz wireless card
iSpot R2411AR/14 with integrated RB/411AR is ideal low cost solution. It can be used for CPE/AP on 2.4Ghz Point-to-Multipoint networks and pair of those can be used to create 2.4Ghz Backbone (Point-to-Point link). iSpot R2411AR/14 is ready to complete hotspot solution.

RouterBOARD RouterBOARD 411AR, 64MB RAM, 1 LAN, 1 MiniPCI, RouterOS Level 4 Wireless card 802.11b/g 100mW Antenna 2.4-2.48Ghz, 14dBi Power 24v power supply + PoE Injector

5GHz/18dBi antenna, RB411, 5Ghz wireless card
iSpot R5411/18 with integrated RB/411 is ideal low cost solution. It can be used for CPE (client premise equipment) on 5Ghz Point-to-Multipoint networks and pair of those can be used to create 5Ghz Backbone (Point-to-Point link).

RouterBOARD RouterBOARD 411, 32MB RAM, 1 LAN, 1 MiniPCI, RouterOS Level 3 Wireless card 802.11a/b/g, 80mW miniPCI card Antenna 5.25-5.8GHz, 18.5dBi Power 24v power supply + PoE Injector

5GHz/18dBi antenna, RB411AH, High Power 5Ghz wireless card
iSpot R5411AH/18 with integrated RB/411AH is ideal low cost solution. It can be used for CPE/AP on 5Ghz Point-to-Multipoint networks and pair of those can be used to create powerful 5Ghz Backbone (Point-to-Point link).

RouterBOARD RouterBOARD 411AH, 680MHz CPU, 64MB RAM, 1 LAN, 1 MiniPCI, RouterOS Level 4 Wireless card 802.11a, 320mW miniPCI card Antenna 5.25-5.8GHz, 18.5dBi Power 24v power supply + PoE Injector

5GHz/20dBi antenna, RB411AH, High Power 5Ghz wireless card
iSpot R5411AH/20 with integrated RB/411AH is ideal low cost solution. It can be used for CPE/AP on 5Ghz Point-to-Multipoint networks and pair of those can be used to create powerful 5Ghz Backbone (Point-to-Point link).

RouterBOARD RouterBOARD 411AH, 680MHz CPU, 64MB RAM, 1 LAN, 1 MiniPCI, RouterOS Level 4 Wireless card 802.11a, 320mW miniPCI card Antenna 5.47-5.85GHz, 20dBi Power 24V power supply + PoE Injector

5GHz/20dBi antenna, RB433AH, High Power 5Ghz wireless card
iSpot R5433AH/20 with integrated RB/433AH is ideal low cost solution. It can be used for CPE/AP on 5Ghz Point-to-Multipoint networks and pair of those can be used to create powerful 5Ghz Backbone (Point-to-Point link).

RouterBOARD RouterBOARD 433AH, 680MHz CPU, 128MB RAM, 3 LAN, 3 MiniPCI, RouterOS Level 5 Wireless card 802.11a, 320mW miniPCI card Antenna 5.47-5.85GHz, 20dBi Power 24V power supply + PoE Injector