Lan Protector
The Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10/100 Base-T networks.

AC/DC Converter (25-70VAC or 35-100VDC)/12VDC 1.5A

Input voltage DC: 35-100V AC: 25-70V Output voltage 12V DC Output power 6W, 1.5A Dimensions 32 x 23 x 18mm

AC/DC Converter 180-250VAC/90VDC 3A

Input voltage 180–250VAC Output voltage 90V, 3A Dimensions 150 x 150 x 85mm

Passive POE KIT, Injector+Splitter
The injector takes the electricity from the Power Adapter and the data from the Ethernet network, then combined them into a signal that can be transmitted through the UTP/STP cable. The splitter divides data and power. Powering Ethernet terminals such as IP Telephone sets, wireless access point, and Internet camera.

POE Injector
The base Unit takes the electricity from the Power Adapter and the data from the Ethernet network, then combined them into a signal that can be transmitted through the UTP/STP cable.

Gigabit POE Injector
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.

Adapter for RouterBOARD, AC220V/24V DC, 38W, 1.6A

Adapter for RouterBOARD, AC220V/48V DC, 30W

Power adapter with POE, 18VDC, 0.7A

Input voltage 100-240VAC Output voltage 18VDC Output power 700mA

Power adapter with POE, 24VDC, 0.75A

Input voltage 100-240VAC Output voltage 24VDC Output power 750mA

Power adapter with POE, 24VDC, 1.6A

Input voltage 100-240VAC Output voltage 24VDC Output power 1.6A

Power Supply DC to ATX, 150W, fan less

Type Open frame ATX Input voltage 48VDC Output voltage +5V / 20A Max +12V / 10A Max +3.3V / 10A Max +5Vsb / 3A Max -12V / 0.25A Output power 150W Input connector Ø5.5 / Ø2.5 mm Dimensions 70 x 150 x 28 mm

POE KIT 48VDC ATX 150W
POE KIT 48VDC ATX 150W is designed to power ATX devices over standard cat5 cable line. Kit included's Power Supply DC to ATX 150W, Adapter AC to DC/48V and two injectors.